M E M O R A N D U M. Technical Committee on Tactical and Technical Operations Protective Clothing and Equipment

Transcription

1 National Fire Protection Association 1 Batterymarch Park, Quincy, MA Phone: Fax: M E M O R A N D U M To: Technical Committee on Tactical and Technical Operations Protective Clothing and Equipment From: Yvonne Smith, Project Administrator Date: April 29, 2015 Subject: NFPA 1986 First Draft TC FINAL Ballot Results (F2016) According to the final ballot results, all ballot items received the necessary affirmative votes to pass ballot. 20 Members Eligible to Vote 7 Not Returned (Adams, Anderson, Connell, Gainey, Morey, Robinson, Szalajda) 13 Affirmative on All Revisions 0 Affirmative with Comment on one or more Revisions 0 Negative on one or more Revisions 0 Abstentions on one or more Revisions The attached report shows the number of affirmative, negative, and abstaining votes as well as the explanation of the vote for each first/second revision. There are two criteria necessary for each first/second revision to pass ballot: (1) simple majority and (2) affirmative 2 /3 vote. The mock examples below show how the calculations are determined. (1) Example for Simple Majority: Assuming there are 20 vote eligible committee members, 11 affirmative votes are required to pass ballot. (Sample calculation: 20 members eligible to vote 2 = = 11) (2) Example for Affirmative 2 /3: Assuming there are 20 vote eligible committee members and 1 member did not return their ballot and 2 members abstained, the number of affirmative votes required would be 12. (Sample calculation: 20 members eligible to vote 1 not returned 2 abstentions = 17 x 0.66 = = 12 ) As always please feel free to contact me if you have any questions.

2 of 43 4/29/ :11 AM First Revision No. 24-NFPA [ Global Input ] Proposal for a document title change to "NFPA 1986: STANDARD ON RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS THIS IS TO MATCH THE ORDER OF TACTICAL AND TECHNICAL TO MATCH THE TECHNICAL COMMITTEE NAME. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 16:15:46 EST 2015 Committee Statement Committee Statement: Document title would match the Technical Committee name. Response Message: Public Input No. 17-NFPA [Global Input] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All

3 Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. of 43 4/29/ :11 AM

4 of 43 4/29/ :11 AM First Revision No. 1-NFPA [ Section No ] 1.1.1* This standard shall specify the minimum requirements for the design, performance, testing, and certification of (1) new compressed breathing air open-circuit self-contained breathing apparatus (SCBA) and compressed breathing air combination open-circuit self-contained breathing apparatus and supplied air respirators (SCBA/SARs); and for the (2) replacement parts, components, and accessories for those respirators. Supplemental Information File Name FR-1_A docx Description Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 09:42:43 EST 2015 Committee Statement Committee Statement: Response Message: The TC agrees that the requirement is somewhat confusing as written and was modified for clarity. The TC is adding explanatory text for Public Input No. 15-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W.

5 Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. of 43 4/29/ :11 AM

6 of 43 4/29/ :11 AM First Revision No. 3-NFPA [ Section No ] The purpose of this standard shall be to establish minimum levels of SCBA performance for respiratory protection of emergency services personnel in non-fire-fighting operations in atmospheres that are categorized as immediately dangerous to life or health (IDLH). Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 10:48:12 EST 2015 Committee Statement Committee Statement: The TC is correcting a typographical error. Response Message: Public Input No. 20-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F.

7 of 43 4/29/ :11 AM Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

8 of 43 4/29/ :11 AM First Revision No. 5-NFPA [ Section No ] * If the SCBA is equipped with an emergency breathing safety system (EBSS), the EBSS performance requirements set forth in this standard shall apply only to open-circuit SCBA and combination SCBA/SARs used by emergency services personnel for respiratory protection of its personnel during the applications listed in Supplemental Information File Name FR-5_A docx Description Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 10:56:26 EST 2015 Committee Statement Committee Statement: The TC is adding an asterisk and adding an Annex item. Response Message: Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All

9 Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. of 43 4/29/ :11 AM

10 of 43 4/29/ :11 AM First Revision No. 29-NFPA [ Section No ] CGA Publications. Compressed Gas Association, George Carter Way, Suite 103, Chantilly VA CGA V-1, Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections, Edition 13, Submitter Information Verification Submitter Full Name: Sonia Barbosa Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Thu Mar 26 15:58:39 EDT 2015 Committee Statement Committee Statement: Response Message: Deleting section since CGA publication is not referenced in mandatory sections of document. Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F.

11 0 of 43 4/29/ :11 AM Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

12 1 of 43 4/29/ :11 AM First Revision No. 6-NFPA [ Section No ] Sample. (1) Ensemble Product, element, component, composite, or accessory that is conditioned for testing ( see also , Specimen ) ; (2) ensemble, element, item, component, or accessory randomly selected from the manufacturer's production line, the manufacturer's inventory, or the open market. (2) Product, component, or accessory that is conditioned for testing. (See also , Specimen.) Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 11:28:21 EST 2015 Committee Statement Committee Statement: Response Message: The TC believes that the definition as written was directed toward ensembles, not respirators. Also, the order of the two definitions should be switched to indicate the order of importance. Public Input No. 6-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane

13 Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 2 of 43 4/29/ :11 AM

14 3 of 43 4/29/ :11 AM First Revision No. 7-NFPA [ Section No ] Specimen. The conditioned ensemble product, element, component, or composite accessory that is tested. Specimens are taken from samples. (See also , Sample.) Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 11:31:45 EST 2015 Committee Statement Committee Statement: Response Message: The TC believes that the definition as written was directed toward ensembles, not respirators. Public Input No. 7-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F.

15 4 of 43 4/29/ :11 AM Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

16 5 of 43 4/29/ :11 AM First Revision No. 9-NFPA [ Section No ] A minimum of seven five identical SCBA that are to be certified to this standard shall be selected from the manufacturer's production. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 11:52:21 EST 2015 Committee Statement Committee Statement: The TC notes that there are only 5 test series which require SCBAs to used. See Section and Table Response Message: Public Input No. 24-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F.

17 6 of 43 4/29/ :11 AM Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

18 7 of 43 4/29/ :11 AM First Revision No. 10-NFPA [ Section No ] Recertification shall include inspection and evaluation to all design requirements and testing to all performance requirements as required by and on all manufacturer models and components. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 11:53:17 EST 2015 Committee Statement Committee Statement: The TC is correcting the referenced section. The revised section corresponds with the similar requirement in NFPA Also, the referenced sections indicate the number of samples to be tested and do not refer to annual testing. Response Message: Public Input No. 25-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane

19 Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 8 of 43 4/29/ :11 AM

20 9 of 43 4/29/ :11 AM First Revision No. 8-NFPA [ New Section after ] It is permissible for product to be manufactured for the follow-up inspection program to ensure correct configuration is available at the request of the certification organization. These samples shall be selected at random from a product completed on the manufacturer s production line. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 11:46:01 EST 2015 Committee Statement Committee Statement: Response Message: The TC believes that as part of the annual recertification, the certification organization may request product that is not normally requested and manufacturers do not always carry the complete product line. This allows the certification agency to determine the desired product for annual testing and does not force the manufacturer to have all models in stock. Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J.

21 Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 0 of 43 4/29/ :11 AM

22 1 of 43 4/29/ :11 AM First Revision No. 11-NFPA [ Section No ] SCBA components, as listed on the NIOSH certification labels, shall be marked where practicable directly on the component with the lot number, the serial number, or the year and month of manufacture. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 13:48:08 EST 2015 Committee Statement Committee Statement: The TC believes that labeling products with the required information works well when it is large enough, but there are instances when the components are smaller and labeling does not work as well. The information in these case would need to be shown on the packaging. There are many accessory items that are currently handled in this manner. Response Message: Public Input No. 26-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane

23 Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 2 of 43 4/29/ :11 AM

24 3 of 43 4/29/ :11 AM First Revision No. 12-NFPA [ Section No ] Information or training materials regarding pre-use shall be provided at least on the following areas: (1) Safety considerations (2) Limitations of use (3) Charging breathing air cylinders (4) Breathing air quality in accordance with NFPA 1989 (5) Marking recommendations and restrictions (6) Warranty information (7) Recommended storage practices (8) Mounting on/in vehicles Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 13:54:47 EST 2015 Committee Statement Committee Statement: Response Message: The TC is indicating the standard's name and notes that the use of the standard's number and name should be consistent throughout the document. Public Input No. 27-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P.

25 Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 4 of 43 4/29/ :11 AM

26 5 of 43 4/29/ :11 AM First Revision No. 27-NFPA [ Section No ] 5.2.6* Information or training materials regarding use shall be provided at least on the following areas: (1) Pre-use checks (2) Recharging breathing air cylinders (3) Emergency procedures to be followed in the event of damage, malfunction, or failure of the breathing apparatus (4) Emergency procedures to be followed in the event of an out-of-air situation Supplemental Information File Name FR-27_A docx Description Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Wed Mar 04 10:41:43 EST 2015 Committee Statement Committee Statement: Response Message: The TC is adding an asterisk to this paragraph, and is creating an Annex item to include NFPA 1500 as indicated in the Public Input. Public Input No. 28-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P.

27 Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 6 of 43 4/29/ :11 AM

28 7 of 43 4/29/ :11 AM First Revision No. 13-NFPA [ Section No ] 5.2.7* Information or training materials regarding periodic maintenance and cleaning shall be provided at least on the following areas: (1) Cleaning instructions and precautions (2) Disinfecting procedures (3) Maintenance frequency and details (4) Methods of repair, where applicable (5) Low power source signals and power source replacement, where applicable (6) Complete instructions for reporting to the manufacturer, certification authority organization, and NIOSH/NPPTL all returned equipment or complaints of damage, malfunction, or failure of the breathing apparatus that could present a hazard to the user Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 14:17:05 EST 2015 Committee Statement Committee Statement: The TC notes that the correct term is certification organization, not certification authority. Response Message: Public Input No. 11-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A.

29 Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 8 of 43 4/29/ :11 AM

30 First Revision No. 26-NFPA [ Section No. 6.5 ] 6.5 Power Source Design Requirements Where the SCBA is equipped with a power source for electronics, it shall be either a single dedicated source for one device or a common power source for multiple devices Where the SCBA is equipped with a HUD and all electronic devices that are part of the SCBA share a common power source, a single at least one low power source alert signal shall be provided and shall be part of the HUD display Where multiple but not all electronic devices that are part of the SCBA share a common power source, a low power source alert signal shall be located on each of those electronic devices supplied by the common power source and positioned on each of those electronic devices where it will be detected upon device activation with the electronic device mounted in its permanent position on the SCBA Where an electronic device uses a single, dedicated power source, the low power source alert signal shall be located on the electronic device and positioned where it will be detected upon device activation with the electronic device mounted in its permanent position on the SCBA Where a HUD display of low power source alert signal(s) specified in is visual, the low power source alert signal(s) shall be positioned within the user's field of vision with the SCBA facepiece properly donned Where a power source is used for HUD to comply with the requirements of this standard, HUD shall provide an alert signal for low power source capacity when the remaining power source life will provide a minimum of 2 hours of operation of the HUD at maximum electrical draw Where the low power source alert signal is visual, it shall be independent from and physically distinguishable from the breathing air cylinder content visual alert signal display When the HUD is in the active mode and uses a low power source visual alert signal, the low power source visual alert signal shall be displayed at all times when the power source condition is below the level specified in except as provided in Where the HUD is capable of being user controlled, the low power source capacity visual display function shall be permitted to be disabled upon indication of a low power source condition. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Wed Mar 04 09:44:22 EST 2015 Committee Statement Committee The TC notes that since the HUD is not a mandatory component that could be added at any time, 9 of 43 4/29/ :11 AM

31 0 of 43 4/29/ :11 AM Statement: a change to only the low power warning would be difficult for SCBAs that are in service which are compliant to the NFPA 1986 standard. In these cases the low power warning will already be located elsewhere and would be known to the user. Response Message: Public Input No. 40-NFPA [Section No. 6.5] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

32 1 of 43 4/29/ :11 AM First Revision No. 17-NFPA [ Section No ] During the environmental exposures in , , , and , the SCBA facepiece shall be mounted on a Scott Aviation Model No or test headform or equivalent. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 15:47:18 EST 2015 Committee Statement Committee Statement: The TC is clarifying the test procedure. Response Message: Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan

33 2 of 43 4/29/ :11 AM Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

34 3 of 43 4/29/ :11 AM First Revision No. 18-NFPA [ Section No ] The haze of the specimen shall be measured using a haze meter in accordance with ASTM D1003, Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics, and recorded with the following additions: (1) The haze shall be measured in the middle of the specimen ±1.6 mm (± / 16 in.). (2) The specimen shall be repositioned to achieve the maximum haze value within the area defined in (1). (3) The haze meter shall have a specified aperture of 22.4 mm ( / 8 in.). (4) The haze meter shall have a visual display showing 0.1 percent resolution. (5) The haze meter shall be calibrated before and after each day's use following procedures specified in ASTM D1003., Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 15:50:00 EST 2015 Committee Statement Committee Statement: Response Message: The use of the ASTM D1003 name and number is consistent with other sections of this standard. Public Input No. 34-NFPA [Section No ] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward

35 Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 4 of 43 4/29/ :11 AM

36 5 of 43 4/29/ :11 AM First Revision No. 28-NFPA [ Section No ] * The gain of the powered speaker amplifier used to generate the pink noise shall be adjusted to achieve an A-weighted sound level of db, ±0.5 db below the signal level generated as identified in , measured at the microphone placed as identified in and Supplemental Information File Name FR-28_A docx Description Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Wed Mar 04 11:45:41 EST 2015 Committee Statement Committee Statement: Response Message: The TC is making this change based on operational requirements for passive speech. The TC is also adding an Annex with further explanatory information. Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All

37 Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 6 of 43 4/29/ :11 AM

38 First Revision No. 19-NFPA [ Section No ] 8.10 EOSTI Recognition Test Application. This test method shall apply to complete SCBA Samples Sample. Samples The sample for testing shall be selected as specified in Specimen Preparation. Prior to testing, specimens the specimen shall be conditioned for a minimum of 4 hours at an ambient temperature of 22 C, ±3 C (72 F, ±5 F) and RH of 50 percent, ±25 percent Apparatus An adapter shall be provided that allows the test subject to manually switch between a breathing air supply greater than 30 percent of the SCBA breathing air cylinder rated service pressure and a breathing air supply pressure of 18 bar, ±1 bar (265 psi, ±15 psi) Each SCBA The test subject shall wear a complete Class 2 non-encapsulating ensemble with gloves and footwear certified as compliant with NFPA 1994 specimen shall be tested separately by two individual test subjects Test subjects shall wear a complete Class 2 non-encapsulating ensemble with gloves and footwear certified as compliant with NFPA Testing shall be performed with the test subjects subject walking at 5 km/hr, ±0.2 km/hr (3 mph, ±0.12 mph) on a treadmill at zero percent grade Testing shall be conducted in a test chamber that absorbs a minimum of 90 percent of all sound from 500 Hz to 5000 Hz Test subjects The test subject shall have audiometrically normal hearing as defined in Section 5.3 of ANSI/ASA S3.2, Method for Measuring the Intelligibility of Speech over Communication Systems, in the range of 500 Hz to 3000 Hz Test subjects The test subject shall have had a physical examination conducted by a physician within the 12 months immediately preceding the date of testing The treadmill shall be positioned in the test chamber specified in in a location that meets the conditions for background noise, lighting, and distraction specified in and The test chamber shall be filled with pink noise with a tolerance of 6 db per octave band from 400 Hz to 4000 Hz and shall be adjusted to achieve an A-weighted sound level of 75 db, ±2 db measured at each ear of the test subject when the subject is walking on the treadmill as specified in The forward axis of the loudspeaker shall be located as far as possible from and pointed away from the test subject so as to create a quasi-uniform sound field at the test subject's ears More than one loudspeaker shall be permitted to be used to achieve the desired sound level The area in the test chamber where the test subject's head is positioned when the subject is standing in the walking location on the treadmill shall be artificially lighted to achieve a light level between 100 lux and 500 lux. 7 of 43 4/29/ :11 AM

39 A reading stand containing printed text shall be positioned relative to the treadmill as follows: (1) The vertical center of the text shall be in line with the center of the treadmill track within ±100 mm (±4 in.). (2) The horizontal center of the text shall be at the same height, ±100 mm (±4 in.), as the eye level of the test subject when the subject is standing in the walking position on the treadmill. (3) The text shall be at a distance from the test subject that permits the text to be read by the subject while the subject is walking on the treadmill Procedure SCBA test specimens shall be tested at an ambient temperature of 22 C, ±3 C (72 F, ±5 F) and RH of 50 percent, ±25 percent A test The test subject wearing the protective ensemble specified in shall don the test specimen SCBA and begin walking on the treadmill in the ambient conditions specified in and While breathing from the SCBA, the test subject shall read aloud the printed text The person conducting the testing shall switch from the breathing air supply at greater than 30 percent of cylinder rated service pressure to 18 bar, ±1 bar (265 psi, ±15 psi) at a random point between 30 seconds and 120 seconds from the commencement of the test The test subject shall acknowledge recognition of the alarm signal immediately upon becoming aware of it by a gesture that has been predetermined between the test subject and the person performing the testing The test shall be repeated by the second test subject Report. The time elapsed between the switch to low supply air pressure and the acknowledgement of recognition of the EOSTI alarm signal by the test subject shall be recorded and reported Interpretation. Failure of either of the two test subjects to acknowledge recognition of the EOSTI alarm signal within the time period specified in Section 7.10, EOSTI Alarm Recognition, shall constitute failing performance. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 15:59:02 EST 2015 Committee Statement Committee Statement: The TC notes that this standard only requires a single EOSTI in order to be compliant with the objective of keeping multiple noises or visual alarms to a minimum and prevents confusion when multiple EOSTIs are activating. The standard was patterned after NFPA 1981 which required two EOSTIs that resulted in a "double blind" test so that each subject did not know which EOSTI had been disabled, and with only one EOSTI a "double blind" test is not needed. Therefore there is no reason to test the EOSTI twice as long as the test subject meets the requirements as stated in sections and of 43 4/29/ :11 AM

40 9 of 43 4/29/ :11 AM Response Message: Public Input No. 41-NFPA [Section No. 8.10] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H.

41 0 of 43 4/29/ :11 AM First Revision No. 25-NFPA [ Section No. A.7.1 ] A.7.1 The current NIOSH certification test method, 42 CFR 84, uses Approval of Respiratory Protective Devices, uses a ventilation rate of 40 L/min, while NFPA 1981 NFPA 1986 requires an airflow test based on a ventilation rate of 100 L/min. A ventilation rate of 100 standard L/min encompasses the 98th percentile of all fire fighters studied. The ability of the SCBA to supply the 100 L/min of breathing gas is measured in this airflow performance test by monitoring the pressure within the facepiece. Specific response times for both the pressure transducer and the recorder are specified in this standard. It is important to note that if other types of recording devices, measuring equipment, and testing methods are used, pressure fluctuations might appear in the facepiece as short (millisecond) negative pressure spikes. The significance of these spikes to the actual protection afforded the user by the SCBA is not fully understood at this time. Additional studies are needed to determine the significance, if any, of these spikes. Because the negative spikes might affect the actual protection offered by the SCBA, it is recommended that a facepiece fitting program be established. Quantitative fitting tests are recognized to be the best method for determining the facepiece-to-face seal and should be performed by the fire service wherever SCBA are used. For departments that wish to perform quantitative fit testing, a suggested procedure for conducting such tests can be found in ANSI Z88.2, Practices for Respiratory Protection; ANSI Z88.10, Respirator Fit TestMethods; and 29 CFR , Respiratory Protection. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 16:31:04 EST 2015 Committee Statement Committee Statement: Response Message: The TC notes that the use of the 42 CFR 84 and NFPA 1986 document titles and numbers is consistent with other places in the document where standards are referenced. Public Input No. 38-NFPA [Section No. A.7.1] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig

42 Anderson, Edward Connell, Caoimhin P. Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 1 of 43 4/29/ :11 AM

43 First Revision No. 14-NFPA [ Section No. A.7.7 ] A.7.7 Because the communications test requires human subjects, there were variations in the data used to determine the appropriate pass or fail criteria. Therefore, a statistical approach to analyze the data was required to determine whether an individual SCBA meets the pass or fail criteria of Section 7.10, EOSTI Alarm Recognition. A null hypothesis test utilizing the Student's t -distribution is the appropriate method to do this. The Student's t -distribution of 2.13 results from the following conditions: degrees of freedom = 4; confidence level = 95 percent. Refer to any current statistical text for further information. Submitter Information Verification Submitter Full Name: Dave Trebisacci Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Tue Mar 03 15:39:46 EST 2015 Committee Statement Committee Statement: The TC notes that this is a new standard and users may not be aware that the information presented herein was modeled after NFPA 1981:2013 edition. Since no human subject testing is to be performed for communications, this Annex paragraph is not required in this document. Response Message: Public Input No. 32-NFPA [Section No. A.7.7] Public Input No. 31-NFPA [Section No. 7.7] Ballot Results This item has passed ballot 20 Eligible Voters 7 Not Returned 13 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Adams, Craig Anderson, Edward Connell, Caoimhin P. 2 of 43 4/29/ :11 AM

44 Gainey, Robin R. Morey, Chad A. Robinson, Casandra W. Szalajda, Jonathan V. Affirmative All Barker, Daniel J. Bray, Shane Clifford, Brian J. Corrado, Steven D. Gulledge, Beverly F. Lancaster, Beth C. Lewis, Evan Mayhue, Clint Montgomery, Brian Roncone, Ed Sanders, Stephen R. Sell, Robert Weinstein, Steven H. 3 of 43 4/29/ :11 AM